فهرست مقالات مجلات
ردیف
عنوان مقاله
نویسنده/نویسندگان
عنوان مجله
تاریخ انتشار
1
Microstructural and mechanical characterization of Al/Cu interface in a bimetallic composite produced by compound casting
شیما احمدزاده سلوط,سید محمد حسین میرباقری
Scientific Reports
1403/1/11
2
Fracture Mechanism during Uniaxial Compression of a Novel Metal/Metal Composite with 3D Single Integrated Reinforcement
سالار روحانی نژاد,سید محمد حسین میرباقری
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
1402/12/27
3
Influence of Ni and PWHT on microstructure evolution and mechanical properties of GTA-welded duplex stainless steel and super duplex stainless steel joints: A comparative investigation
محمود عباسی ,بهروز باقری وانانی,علی طهایی,جیان لوکا گاراگنانی
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
1402/12/15
4
Penetration depth, phase balance and corrosion behaviour in activated TIG welding of UNS S32205
کمال روحبخش حلوائی,علیرضا ابراهیمی
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
1402/12/14
5
Microstructure evolution and mechanical properties of laser-welded joints of 1.2 GPa-class quenching and partitioning steel
محسن محمدی زهرانی,اسلام رنجبرنوده,مصطفی کتابچی,احسان قاسمعلی
OPTICS AND LASER TECHNOLOGY
1402/12/11
6
The hardfacing properties of the nickel-based coating deposited by the PTA process with the addition of wc nano-particles: Wear investigation
علی طهایی,بهروز باقری وانانی,محمود عباسی ,آنا آریزمندی مورکوچو
TRIBOLOGY INTERNATIONAL
1402/12/8
7
The Effect of Bonding Temperature on the Microstructural and Mechanical Properties of Transient Liquid Phase Bonded Commercially Pure Ti Joint
وحید ملکی,سجاد شاکرین,سیدعلیرضا ضیایی,حمید امیدوار,سید احسان میرصالحی
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
1402/12/5
8
Experimental and numerical studies on mechanical properties of hot-stamped tailor welded AA7075-T6
علیرضا جلیل,نصراله بانی مصطفی عرب,مالک نادری,یعقوب دادگر اصل
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
1402/11/30
9
An eco-friendly and low-cost approach for separation and recycling of Mo and Cu from molybdenite purification wastewater
هادی خلیفه ء,میلاد رضائی
MINERALS ENGINEERING
1402/11/28
10
Selective detection of Cysteine via plasmonic silver nanotriangles in the presence of KI with an emphasis on mechanism
نیلوفر نمازی کوچک,داود حق شناس فتمه سری,صادق فیروزی
MATERIALS CHEMISTRY AND PHYSICS
1402/11/26
11
Oil adsorption behavior of N-doped, co-decorated graphene/carbon nanotube/cellulose microfiber aerogels: A comprehensive investigation of composite components effect
فهیمه غلامی,ارش قاضی تبار,مالک نادری,ایلار هویت دوست,دل اسا علی جانی اشنا,کیارش قاضی تبار, Bogumil Brycki,ویلیام رتنر
SURFACES AND INTERFACES
1402/11/13
12
The effects of SLM process parameters on the relative density and hardness of austenitic stainless steel 316L
محمدامین بختیاریان,حمید امیدوار,امیرحسین مشهوری آذر,زین الدین سجوری,هاکان گوئور
Journal of Materials Research and Technology
1402/11/5
13
Mechanical and energy absorption properties of multilayered ultra-light sandwich panels produced by 3D-printing and electroforming
مهرنوش حسین پور,سالار روحانی نژاد,سید محمد حسین میرباقری
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
1402/11/1
14
Corrosion prevention of storage tank bottom using impressed current cathodic protection – Experimental and simulation study
محمد درگاهی پیرالوان,زینب ماهی دشتی,میلاد رضائی
ENGINEERING FAILURE ANALYSIS
1402/10/26
15
Interface characterization of Mg-7Al-1Ca alloy reinforced by integrated 3D–Cu open-cell foam
سالار روحانی نژاد,مهرنوش حسین پور,سید محمد حسین میرباقری
MATERIALS CHARACTERIZATION
1402/10/15
16
N-Doped Graphene Quantum Dots Incorporated into NiCo Bimetallic-Organic Framework as an Electrocatalyst for Alkaline Water Splitting
حامد شوشتری گوگ تپه,میلاد رضائی
ACS Applied Nano Materials
1402/10/14
17
Impacts of diffusion brazing time on mechanical properties of Nicrofer 5520 superalloy joint by Ni-15Cr-3.7B filler metal
علی نساج پوراصفهانی,علی فرزادی,سید احسان میرصالحی
Welding in the World
1402/10/2
18
ریزساختار و خواص مکانیکی اتصال نامشابه آلیاژهای AA۵۰۵۲ و AA۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی
محمدرضا حاجی ها,علی فرزادی,سیدعلی صمدانی اقدم,امیرحسین شعبان زاده,سحر رمضانی
علوم و فناوری جوشکاری ایران
1402/10/2
19
Effect of Graded Coating on the Nanoindentation Properties of HA/Ti Composite Coatings Synthesized by Mechanical Coating Technique on Ti-6Al-4V Substrate
محمود جلالی بیداخویدی,حمید امیدوار,علی زمانیان
Advanced Materials and Technologies (JAMT)
1402/10/1
20
Sandwich structure of negative electrode using N-doped cellulose based carbon aerogel/graphene composite in ultra-battery
محمد آقابرارپور,مالک نادری,سیامک مطهری,سید حسن جعفری
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
1402/9/24
21
Mechanism of self-healing behavior in rolled Cu-2Be flat product
داود میراحمدی خاکی,کامران دهقانی,علی شمسی پور,علی کلاکی
ENGINEERING FAILURE ANALYSIS
1402/9/16
22
A different attempt to investigate the influence of PTA parameters on microstructure evolution and mechanical characteristics of nickel base powder (Ni-WC) deposited tool steel
علی طهایی,بهروز باقری وانانی,محمود عباسی ,آنا آریزمندی مورکوچو
Journal of Materials Research and Technology
1402/9/8
23
Nanostructure Design of MnO2/Partially Oxidized Graphene Nanocomposite Cathode via One-Step Pulse Potential Strategy: Toward Ultralong-Life Zinc-Ion Batteries
شبنم سعدی متعلق,مهران جوانبخت,حمید امیدوار,سجاد حبیب زاده,Biao Gao
ACS Applied Energy Materials
1402/9/3
24
Atomic scale melting/solidification behavior and structural evolutions of AlCoCrFeNi high-entropy alloy in selective laser melting process
میلاد مرادی گنجه,علی فرزادی,علی رمضانی
Journal of Materials Research and Technology
1402/9/1
25
Stable acidic water oxidation by tunable electronic states in B-PbO2 anode electrocatalyst aided by incorporation of various anions and cations
سیده منصوره هاشمی,میلاد رضائی
SURFACES AND INTERFACES
1402/8/23
اولین
قبلی
1
...